Guyed Towers are lightweight to heavyweight towers supported by guy wires and are designed with the ability to carry light to heavy antenna loads. The tower industry prefers these types of towers because they are designed to provide maximum strength, efficiency, versatility and ease of installation. Guyed Towers are typically used in cellular, two way,…
Lattice towers are usually composed of solid rods, tubular pipes, or angular steel. Tubular rod antennæs have relatively low wind drag and are easy to inspect and maintain. ney are relatively heavy towers (impacting shipping and erecting costs), difficult to modify, and difficult to mount antennas on (mounting hardware relies on friction). Pipe towers are…
Self Supporting Tower (SST) or Lattice Tower Lattice tower or usually called as a self support tower (SST) has stem pattern tower which is compiled and connected to form a self supporting framewithout any other subvention.SST Tower is a conventional one in a form of tower frame which is designed with the strong frame, able…
A lattice tower or truss tower is a freestanding framework tower. They can be used as electricity transmission towers especially for voltages above 100 kilovolts, as a radio tower (a self-radiating tower or as a carrier for aerials) or as an observation tower. Details of 3-legged tubular communication lattice tower Height 5-200M Wind Speed 0-300KM/H…
Product introduction: Integrated base station belongs to the field of mobile network base station of communications industry. It is a revolution to the traditional base station. It combines tower body, square cabinet and foundation in one. With current international popular standard industrial design and production pattern, cabling system, communication transmission receiving equipment, air-condition, feeder window,…
A lattice tower or truss tower is a freestanding framework tower. They can be used as electricity transmission towers especially for voltages above 100 kilovolts, as a radio tower (a self-radiating tower or as a carrier for aerials) or as an observation tower. Product Name High Voltage Electric Power Transmission Line Lattice Steel Tower Material…
Material: Hot Roll Steel Q235, Q345, Q420, Q460, ASTM A527 A36, GR50, GR65, ST-37, ST-44, ST-52, S355JR, S355J2G3, SS41, SS50, SS55 and others equivalent steel material Wall thickness :2~30mm Once Forming :16m Once forming without joint Voltage Grade : 10~500KV (10KV, 13.8KV,33KV, 35KV, 66KV, 110KV,132KV, 220KV, 230KV, 330KV, 500KV or Others ) Shape : Conical,…
Angle steel tower is composed of angle steel. As the most common communication tower, they can be seen everywhere in the country Product features: Strong structural stability and high safety. The tower is designed higher with strong load capacity and wind resistance. Low cost, short processing cycle, convenient to transport and install. Height 0-70m Wind…
